Latches & Flip-Flops | Vyrian

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
HD74LS174P-E	Renesas Electronics	D FLIP-FLOP	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	30000000 Hz	TTL		6		5	5		IN-LINE	DIP16,.3	30 ns	8 Amp	FF/Latches	2.54 mm	75 Cel		POSITIVE EDGE	-20 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDIP-T16	1		5.06 mm	7.62 mm	Not Qualified	TRUE		26 mA		e4			19.2 mm	LS
HEF4027BT	NXP Semiconductors	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	4000000 Hz	CMOS		2		5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	210 ns	.36 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	4 MHz	R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e4	30	260	9.9 mm	4000/14000/40000
M74HC279B1R	STMicroelectronics	R-S LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	4		CMOS		2		4.5	2/6	50 pF	IN-LINE	DIP16,.3	195 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		LOW LEVEL	-55 Cel	MATTE TIN	DUAL		R-PDIP-T16		6 V	5.1 mm	7.62 mm	Not Qualified	TRUE	2 V		WITH DUAL S INPUT FOR TWO FUNCTIONS	e3				HC/UH
M74HC73B1R	STMicroelectronics	J-K FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	20000000 Hz	CMOS		2	TUBE	4.5	2/6	50 pF	IN-LINE	DIP14,.3	190 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		NEGATIVE EDGE	-55 Cel	MATTE TIN	DUAL	24 MHz	R-PDIP-T14		6 V	5.1 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		MASTER SLAVE OPERATION	e3				HC/UH
M81016KP	Mitsubishi Electric	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	LSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8		5	5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP20,.25			FF/Latches	.65 mm	85 Cel	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G20	1	5.5 V	1.45 mm	4.4 mm	Not Qualified	INVERTED	4.5 V						6.5 mm	81016
MC14043BCP	Onsemi	R-S LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		4	RAIL	5	5/15	50 pF	IN-LINE	DIP16,.3	350 ns		FF/Latches	2.54 mm	125 Cel	3-STATE	HIGH LEVEL	-55 Cel	Tin/Lead (Sn80Pb20)	DUAL		R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	TRUE	3 V			e0	30	235	19.175 mm	4000/14000/40000
MC74AC74NC	Motorola	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		CMOS		1		5		50 pF	IN-LINE		10.5 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	125 MHz	R-PDIP-T14		6 V	4.69 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V						18.86 mm	AC
MC74VHC74DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	75000000 Hz	CMOS		1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP14,.25	17.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	8.65 mm	AHC/VHC
MM74HC73N	National Semiconductor	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	21000000 Hz	CMOS		2		4.5	2/6	50 pF	IN-LINE	DIP14,.3	160 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL	25 MHz	R-PDIP-T14		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		MASTER SLAVE OPERATION	e0			19.18 mm	HC/UH
NC7SV74K8X	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	150000000 Hz	CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	9.9 ns	2 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	250 MHz	R-PDSO-G8	1	3.6 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.9 V			e3	30	260	2.3 mm	AUP/ULP/V
SN54ALS573J	Texas Instruments	D LATCH	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		TTL		8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	125 Cel	3-STATE		-55 Cel		DUAL		R-XDIP-T20					Not Qualified
SN54LS259BJ	Texas Instruments	D LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		NO	1		TTL		1		5	5	15 pF	IN-LINE	DIP16,.3	24 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		LOW LEVEL	-55 Cel		DUAL		R-CDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	36 mA	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
SN74AHC273DBR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	CMOS		8	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	19.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	.04 mA		e4	NOT SPECIFIED	260	7.2 mm	AHC/VHC/H/U/V
SN74AHC273N	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	70000000 Hz	CMOS		8	TUBE	3.3	2/5.5	50 pF	IN-LINE	DIP20,.3	19.5 ns	8 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	100 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V	.04 mA		e4	NOT SPECIFIED	NOT SPECIFIED	25.4 mm	AHC/VHC/H/U/V
SN74AHC273NSR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	CMOS		8	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP20,.3	19.5 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	.04 mA		e4	NOT SPECIFIED	260	12.6 mm	AHC/VHC/H/U/V
SN74AHC273PW	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	CMOS		8	TUBE	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	19.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.04 mA		e4	NOT SPECIFIED	260	6.5 mm	AHC/VHC/H/U/V
SN74AHC273PWE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	CMOS		8	TUBE	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	19.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	AHC/VHC/H/U/V
SN74AHC273PWG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	CMOS		8	TUBE	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	19.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	AHC/VHC/H/U/V
SN74AHCT74DR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	65000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	10 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	.02 mA		e4	NOT SPECIFIED	260	8.65 mm	AHCT/VHCT/VT
SN74AHCT74DRE4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	65000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	10 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	40	260	8.65 mm	AHCT/VHCT/VT
SN74AHCT74DRG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	65000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	10 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	40	260	8.65 mm	AHCT/VHCT/VT
SN74ALS175N	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	50000000 Hz	TTL		4	TUBE	5	5	50 pF	IN-LINE	DIP16,.3	17 ns	8 Amp	FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	50 MHz	R-PDIP-T16		5.5 V	5.08 mm	6.35 mm	Not Qualified	COMPLEMENTARY	4.5 V	14 mA		e4			19.3 mm	ALS
SN74AUC1G74DCUR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.8 ns	9 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.8 V	.01 mA		e3	NOT SPECIFIED	260	2.3 mm	AUC
SN74AUC1G74DCURE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.8 ns	9 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.8 V	.01 mA		e4	NOT SPECIFIED	260	2.3 mm	AUC
SN74AUC1G74DCURG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.8 ns	9 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.8 V	.01 mA		e4	NOT SPECIFIED	260	2.3 mm	AUC
SN74AUC2G80DCTR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	200000000 Hz	CMOS		1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	1.3 mm	2.8 mm	Not Qualified	INVERTED	.8 V	.01 mA		e4	NOT SPECIFIED	260	2.95 mm	AUC
SN74AUP1G74DQER	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY		YES	1	40000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.04,14	27 ns	4 Amp	FF/Latches	.35 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	180 MHz	R-PDSO-N8	1	3.6 V	.4 mm	1 mm	Not Qualified	COMPLEMENTARY	.8 V	.0009 mA		e4	30	260	1.4 mm	AUP/ULP/V
SN74AUP1G74YFPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	UNSPECIFIED		YES	1	40000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,16	27 ns	4 Amp	FF/Latches	.4 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	180 MHz	R-XBGA-B8	1	3.6 V	.5 mm		Not Qualified	COMPLEMENTARY	.8 V	.0009 mA		e1	NOT SPECIFIED	260		AUP/ULP/V
SN74AUP1G80DCKRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	260000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	28.7 ns	4 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	INVERTED	.8 V	.0009 mA		e4	NOT SPECIFIED	260	2 mm	AUP/ULP/V
SN74F109DR	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	90000000 Hz	TTL		2	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	9.2 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	4.5 V	19 mA		e4	30	260	9.9 mm	F/FAST
SN74HC175D	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		4	TUBE	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	190 ns	5.2 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	2 V	.08 mA		e4	30	260	9.9 mm	HC
SN74HC175DBR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		4	TR	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	190 ns	5.2 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V	.08 mA		e4	30	260	6.2 mm	HC
SN74HC175PW	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS		4	TUBE	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	190 ns	5.2 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V	.08 mA		e4	30	260	5 mm	HC
SN74HCS72QPWRQ1	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	2		CMOS	AEC-Q100	1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		42 ns	7.8 Amp		.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	74 MHz	R-PDSO-G14	1	6 V	1.2 mm	4.4 mm		COMPLEMENTARY	2 V	.002 mA		e4	30	260	5 mm	HC/UH
SN74HCT74DRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	22000000 Hz	CMOS	MIL-PRF-38535	1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	35 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	4.5 V	.04 mA		e4	30	260	8.65 mm	HCT
SN74HCT74DTE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	22000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	35 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	8.65 mm	HCT
SN74LS109AD	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	25000000 Hz	TTL		2	TUBE	5	5	15 pF	SMALL OUTLINE	SOP16,.25	40 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	30 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	8 mA	INVERTED K INPUT	e4	NOT SPECIFIED	260	9.9 mm	LS
SN74LS109ANSR	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	25000000 Hz	TTL		2	TR	5	5	15 pF	SMALL OUTLINE	SOP16,.3	40 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	30 MHz	R-PDSO-G16	1	5.25 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.75 V	15 mA	INVERTED K INPUT	e4	NOT SPECIFIED	260	10.2 mm	LS
SN74LS377NSR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	30000000 Hz	TTL		8	TR	5	5		SMALL OUTLINE	SOP20,.3	27 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G20	1	5.25 V	2 mm	5.3 mm	Not Qualified	TRUE	4.75 V	28 mA		e4	30	260	12.6 mm	LS
SN74LS377NSRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	30000000 Hz	TTL		8	TR	5	5		SMALL OUTLINE	SOP20,.3	27 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G20	1	5.25 V	2 mm	5.3 mm	Not Qualified	TRUE	4.75 V	28 mA		e4	30	260	12.6 mm	LS
SN74LS74ADRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	TTL		1	TR	5	5	15 pF	SMALL OUTLINE	SOP14,.25	40 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	8 mA		e4	30	260	8.65 mm	LS
SN74LV273APWTE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS		8	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	25 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	LV/LV-A/LVX/H
SN74LV273APWTG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS		8	TUBE	2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	25 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	LV/LV-A/LVX/H
SN74LV74APWT	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	45000000 Hz	CMOS		1	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	23 ns	12 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V	.02 mA		e4	30	260	5 mm	LV/LV-A/LVX/H
SN74LVC112APWR	Texas Instruments	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	150000000 Hz	CMOS		2	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	7.1 ns	24 Amp	FF/Latches	.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V	.01 mA		e4	30	260	5 mm	LVC/LCX/Z
SN74LVC1G79DBVRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	20.5 ns	24 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	TRUE	1.65 V			e4	30	260	2.9 mm	LVC/LCX/Z
SN74LVC1G80DBVR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	9.9 ns	32 Amp	FF/Latches	.95 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	INVERTED	1.65 V	.01 mA		e4	NOT SPECIFIED	260	2.9 mm	LVC/LCX/Z
SN74LVC2G79DCUR	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	160000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	9.9 ns	32 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	DUAL	160 MHz	R-PDSO-G8	1	5.5 V	.9 mm	2 mm	Not Qualified	TRUE	1.65 V	.005 mA		e3	NOT SPECIFIED	260	2.3 mm	LVC/LCX/Z

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.