Latches & Flip-Flops | Vyrian

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS76J	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	2		TTL		2		5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE	0 Cel		DUAL		R-XDIP-T16					Not Qualified	COMPLEMENTARY					NOT SPECIFIED	NOT SPECIFIED		LS
SN74LV273APWT	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS		8	TR, 13 INCH	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	27 ns	12 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.02 mA		e4	30	260	6.5 mm	LV/LV-A/LVX/H
SN74LVC1G79DBVRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	20.5 ns	24 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	TRUE	1.65 V			e4	30	260	2.9 mm	LVC/LCX/Z
TC74HC74AF(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	CMOS			TUBE		2/6	50 pF	SMALL OUTLINE	SOP14,.3		4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14	1				Not Qualified						40	260
TPIC6B273DWG4	Texas Instruments	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				8	TUBE	5	5	30 pF	SMALL OUTLINE	SOP20,.4	150 ns		FF/Latches	1.27 mm	125 Cel	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.5 V	.3 mA		e4	30	260	12.8 mm	6B
74AHC1G79GW,125	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		15.5 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	70 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	2 V			e3	30	260	2.05 mm	AHC
74AUP1G374GM,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	21.6 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	360 MHz	R-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V			e3	30	260	1.45 mm	AUP/ULP/V
74AUP1G374GN	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	SON	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		1		1.1			SMALL OUTLINE		21.6 ns			.3 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN	DUAL	360 MHz	R-PDSO-N6	1	3.6 V	.35 mm	.9 mm	Not Qualified	TRUE	.8 V			e3			1 mm	AUP/ULP/V
74AUP1G374GW	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	21.6 ns	1.7 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	360 MHz	R-PDSO-G6	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V			e3	30	260	2 mm	AUP/ULP/V
74AUP1G79GN,132	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	SON	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE	SOLCC6,.04,12	25.6 ns	1.7 Amp	FF/Latches	.3 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N6	1	3.6 V	.35 mm	.9 mm	Not Qualified	TRUE	.8 V			e3	30	260	1 mm	AUP/ULP/V
74AUP1G80GS,132	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY		YES	1		CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	27.2 ns	1.7 Amp	FF/Latches	.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	S-PDSO-N6	1	3.6 V	.35 mm	1 mm	Not Qualified	INVERTED	.8 V			e3	30	260	1 mm	AUP/ULP/V
74AUP2G79GD,125	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY		YES	2	70000000 Hz	CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.12,20	25.6 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.5 mm	2 mm	Not Qualified	TRUE	.8 V			e4	30	260	3 mm	AUP/ULP/V
74AUP2G79GN	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	SON	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		1		1.1			SMALL OUTLINE		25.6 ns			.3 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.35 mm	1 mm	Not Qualified	TRUE	.8 V			e3			1.2 mm	AUP/ULP/V
74AUP2G79GS	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		1		1.1			SMALL OUTLINE, VERY THIN PROFILE		25.6 ns			.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.35 mm	1 mm	Not Qualified	TRUE	.8 V			e3			1.35 mm	AUP/ULP/V
74HC175D,653	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		4	TR	4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	265 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	9.9 mm	HC/UH
74HC273D	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	24000000 Hz	CMOS		8		5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	225 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e4	30	260	12.8 mm	HC/UH
74LCX112MTCX	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	150000000 Hz	CMOS		2	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	9 ns	24 Amp	FF/Latches	.65 mm	85 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	LVC/LCX/Z
74LV74PW,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	48000000 Hz	CMOS		1	BULK	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	33 ns	6 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	48 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1 V			e4	30	260	5 mm	LV/LV-A/LVX/H
74LVC1G80GV,125	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		1	TR	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	13 ns	24 Amp	FF/Latches	.95 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	200 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.5 mm	Not Qualified	INVERTED	1.65 V			e3	30	260	2.9 mm	LVC/LCX/Z
74LVC1G80GW-Q100,125	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	AEC-Q100	1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		13 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-G5		5.5 V	1.1 mm	1.25 mm		INVERTED	1.65 V						2.05 mm	LVC/LCX/Z
74LVC2G74GN	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	SON	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		1		1.8			SMALL OUTLINE		13.4 ns			.3 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	R-PDSO-N8	1	5.5 V	.35 mm	1 mm	Not Qualified	COMPLEMENTARY	1.65 V			e3			1.2 mm	LVC/LCX/Z
74LVC74ABQ,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY		YES	2	120000000 Hz	CMOS		1	TUBE	2.7	3.3	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	7.5 ns	24 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	120 MHz	R-PQCC-N14	1	3.6 V	1 mm	2.5 mm	Not Qualified	COMPLEMENTARY	1.2 V			e4	30	260	3 mm	LVC/LCX/Z
74LVX273MTC	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.7	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	24 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	LV/LV-A/LVX/H
CD4043BNSR	Texas Instruments	R-S LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	300 ns	2.4 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE	HIGH LEVEL	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	18 V	2 mm	5.3 mm	Not Qualified	TRUE	3 V	.06 mA		e4	NOT SPECIFIED	260	10.2 mm	4000/14000/40000
CD74AC175M96E4	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	71000000 Hz	CMOS		4	TR	3.3	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	153 ns	24 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	100 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1.5 V	.16 mA		e4	NOT SPECIFIED	260	9.9 mm	AC
CD74AC175M96G4	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	71000000 Hz	CMOS		4	TR	3.3	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	153 ns	24 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	100 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1.5 V	.16 mA		e4	NOT SPECIFIED	260	9.9 mm	AC
CD74HC377PWR	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	265 ns	5.2 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	23 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.08 mA	WITH HOLD MODE	e4	NOT SPECIFIED	260	6.5 mm	HC/UH
CD74HC377PWRG4	Texas Instruments	D FLIP-FLOP	MILITARY	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	265 ns	5.2 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.08 mA	WITH HOLD MODE	e4	30	260	6.5 mm	HC/UH
CD74HC73ME4	Texas Instruments	J-K FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	20000000 Hz	CMOS		2	TUBE	4.5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	240 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		NEGATIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		MASTER SLAVE OPERATION	e4	30	260	8.65 mm	HC/UH
CD74HC73MTG4	Texas Instruments	J-K FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	20000000 Hz	CMOS		2	TR	4.5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	240 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		NEGATIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	8.65 mm	HC/UH
CD74HC75PWR	Texas Instruments	D LATCH	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2		CMOS		2	TR	4.5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	195 ns	5.2 Amp	FF/Latches	.65 mm	125 Cel		HIGH LEVEL	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V	.08 mA		e4	30	260	5 mm	HC
CD74HCT75M	Texas Instruments	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2		CMOS		2	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	42 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		HIGH LEVEL	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	.08 mA		e4	30	260	9.9 mm	HCT
DM54LS259W/883	National Semiconductor	D LATCH	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC		YES	1		TTL	38535Q/M;38534H;883B	8		5	5		FLATPACK	FL16,.3		4 Amp	FF/Latches	1.27 mm	125 Cel			-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-XDFP-F16					Not Qualified			36 mA		e0
HEF4027BPB	NXP Semiconductors	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		CMOS		2		5		50 pF	IN-LINE		210 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	4 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V						21.6 mm	4000/14000/40000
MC100E151FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1	1100000000 Hz	ECL		6		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.9 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	900 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	90 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	100E
MC10EP51DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.37 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	10E
MC10EP52MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED		YES	1	4000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.38 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	DUAL		S-XDSO-N8	1	5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V		30	260	2 mm	10E
MC74ACT259DG	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		1	RAIL	5	5	50 pF	SMALL OUTLINE	SOP16,.25	12.5 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e3	30	260	9.9 mm	ACT
MC74HC175ADG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	4	20000000 Hz	CMOS		1	RAIL	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	225 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	9.9 mm	HC/UH
MC74HCT74ANG	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	20000000 Hz	CMOS		1	RAIL	5	5	50 pF	IN-LINE	DIP14,.3	36 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	20 MHz	R-PDIP-T14		5.5 V	4.69 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e3		260	18.86 mm	HCT
MC74LCX74DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	150000000 Hz	CMOS		1	TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP14,.25	8.4 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	8.65 mm	LVC/LCX/Z
QS74FCT2823CTQ	Integrated Device Technology	D FLIP-FLOP	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	9	83300000 Hz	CMOS				5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		12 Amp	FF/Latches	.635 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel	TIN LEAD	DUAL		R-PDSO-G24	1				Not Qualified					e0	30	240
SN74AC74DBR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	95000000 Hz	CMOS		1	TR	3	3.3/5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	16 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V	.02 mA		e4	NOT SPECIFIED	260	6.2 mm	AC
SN74ALS74ADR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	34000000 Hz	TTL		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	18 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	34 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	4.5 V	4 mA		e4	30	260	8.65 mm	ALS
SN74ALS74ADRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	34000000 Hz	TTL		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	18 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	34 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	4.5 V	4 mA		e4	30	260	8.65 mm	ALS
SN74ALS990DW	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	26 ns	24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	HIGH LEVEL	0 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	70 mA	WITH READ-BACK	e4	30	260	12.8 mm	ALS
SN74AUP1G80DCKR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	260000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	28.7 ns	4 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	INVERTED	.8 V	.0009 mA		e4	NOT SPECIFIED	260	2 mm	AUP/ULP/V
SN74HC112DT	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	20000000 Hz	CMOS		2	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	155 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	2 V	.04 mA		e4	30	260	9.9 mm	HC

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.