DSP Peripherals

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	Screening Level	Output Data Bus Width	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	Width	Additional Features	Boundary Scan	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Technology	Maximum Supply Current	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Low Power Mode	JESD-609 Code
AD9833BRMZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V		1	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	2.3 V	105 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	3 mm		NO		25 MHz	30	260	3 mm	CMOS		2.5 V	DSP Peripherals	.5 mm	S-PDSO-G10	1	Not Qualified	YES	e3
AD9833BRMZ-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V		1	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	2.3 V	105 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	3 mm		NO		25 MHz	30	260	3 mm	CMOS		2.5 V	DSP Peripherals	.5 mm	S-PDSO-G10	1	Not Qualified	YES	e3
AD9833BRMZ-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V		1	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	2.3 V	105 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	3 mm		NO		25 MHz	30	260	3 mm	CMOS		2.5 V	DSP Peripherals	.5 mm	S-PDSO-G10	1	Not Qualified	YES	e3
LT5560EDD#PBF	Analog Devices	DSP PERIPHERAL, MIXER	INDUSTRIAL	NO LEAD	8	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V	85 Cel	-40 Cel	MATTE TIN	DUAL	.8 mm	3 mm		NO		140 MHz	30	260	3 mm	CMOS		3 V		.5 mm	R-PDSO-N8	1	Not Qualified	YES	e3
LT5560EDD#TRPBF	Analog Devices	DSP PERIPHERAL, MIXER	INDUSTRIAL	NO LEAD	8	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V	85 Cel	-40 Cel	MATTE TIN	DUAL	.8 mm	3 mm		NO		140 MHz	30	260	3 mm	CMOS		3 V		.5 mm	R-PDSO-N8	1	Not Qualified	YES	e3
AD9834BRUZ-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2.3 V	105 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	4.4 mm		NO		50 MHz		260	6.5 mm	CMOS		2.5 V	DSP Peripherals	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
LT5560EDD#TR	Analog Devices	DSP PERIPHERAL, MIXER	INDUSTRIAL	NO LEAD	8	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	.8 mm	3 mm		NO		140 MHz			3 mm	CMOS		3 V		.5 mm	R-PDSO-N8	1	Not Qualified	YES	e0
LT5560EDD	Analog Devices	DSP PERIPHERAL, MIXER	INDUSTRIAL	NO LEAD	8	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	.8 mm	3 mm		NO		140 MHz			3 mm	CMOS		3 V		.5 mm	R-PDSO-N8	1	Not Qualified	YES	e0
AD9834BRUZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2.3 V	105 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	4.4 mm		NO		50 MHz		260	6.5 mm	CMOS		2.5 V	DSP Peripherals	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
AD9834BRUZ-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2.3 V	105 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	4.4 mm		NO		50 MHz		260	6.5 mm	CMOS		2.5 V	DSP Peripherals	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
AD9833BRM-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V		1	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	2.3 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	3 mm		NO		25 MHz		240	3 mm	CMOS		2.5 V	DSP Peripherals	.5 mm	S-PDSO-G10	1	Not Qualified	YES	e0
AD9835BRUZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V		1	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.25 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	4.4 mm		NO	1	50 MHz	30	260	5 mm	CMOS		5 V	DSP Peripherals	.65 mm	R-PDSO-G16	1	Not Qualified	YES	e3
AD9833BRM	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V		1	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	2.3 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	3 mm		NO		25 MHz	30	240	3 mm	CMOS		2.5 V	DSP Peripherals	.5 mm	S-PDSO-G10	1	Not Qualified	YES	e0
AD9833BRM-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V		1	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	2.3 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	3 mm		NO		25 MHz		240	3 mm	CMOS		2.5 V	DSP Peripherals	.5 mm	S-PDSO-G10	1	Not Qualified	YES	e0
AD9833SRMZ-EP-RL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	MILITARY	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.3 V	125 Cel	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	1.1 mm	3 mm		NO		25 MHz	30	260	3 mm	CMOS		2.5 V		.5 mm	S-PDSO-G10	1		YES	e4
AD9954YSVZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	7 mm		NO		400 MHz	30	260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e3
AD9850BRSZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V				SMALL OUTLINE, SHRINK PITCH		4.75 V	85 Cel	-40 Cel	MATTE TIN	DUAL	2 mm	5.3 mm		NO	8	125 MHz		260	10.2 mm	CMOS		5 V		.65 mm	R-PDSO-G28	1	Not Qualified	YES	e3
AD9850BRSZ-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V				SMALL OUTLINE, SHRINK PITCH		4.75 V	85 Cel	-40 Cel	MATTE TIN	DUAL	2 mm	5.3 mm		NO	8	125 MHz		260	10.2 mm	CMOS		5 V		.65 mm	R-PDSO-G28	1	Not Qualified	YES	e3
AD9833WBRMZ-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	AEC-Q100		2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	2.3 V	105 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	3 mm		NO		25 MHz	30	260	3 mm	CMOS		2.5 V	DSP Peripherals	.5 mm	S-PDSO-G10	1	Not Qualified	YES	e3
AD9951YSVZ-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	1.2 mm	7 mm		NO		400 MHz		260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3		YES	e3
AD9951YSVZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	7 mm		NO		400 MHz	30	260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e3
AD9835BRUZ-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V		1	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.25 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	4.4 mm		NO	1	50 MHz	30	260	5 mm	CMOS		5 V	DSP Peripherals	.65 mm	R-PDSO-G16	1	Not Qualified	YES	e3
AD9858BSVZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.465 V				FLATPACK, THIN PROFILE, FINE PITCH		3.135 V	85 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	14 mm		NO		2000 MHz		260	14 mm	CMOS		3.3 V		.5 mm	S-PQFP-G100	3	Not Qualified	YES	e3
AD9954YSVZ-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	7 mm		NO		400 MHz	30	260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e3
AD9835BRUZ-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V		1	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.25 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	4.4 mm		NO	1	50 MHz	30	260	5 mm	CMOS		5 V	DSP Peripherals	.65 mm	R-PDSO-G16	1	Not Qualified	YES	e3
AD9850BRS	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V				SMALL OUTLINE, SHRINK PITCH		4.75 V	85 Cel	-40 Cel	TIN LEAD	DUAL	2 mm	5.3 mm		NO	8	125 MHz		240	10.2 mm	CMOS	96 mA	5 V		.65 mm	R-PDSO-G28	1	Not Qualified	YES	e0
AD9959BCPZ-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	NO LEAD	56	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V		10		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V	85 Cel	-40 Cel	MATTE TIN	QUAD	1 mm	8 mm	ALSO REQUIRES 3.3V SUPPLY	NO	32	500 MHz		260	8 mm	CMOS		1.8 V		.5 mm	S-XQCC-N56	3	Not Qualified	YES	e3
AM29027-25GC	Advanced Micro Devices	DSP PERIPHERAL, FLOATING POINT PROCESSOR	OTHER	PIN/PEG	169	PGA	SQUARE	CERAMIC, METAL-SEALED COFIRED	NO	5.25 V		32	5	GRID ARRAY	PGA169,17X17	4.75 V	85 Cel	0 Cel	TIN LEAD	PERPENDICULAR	4.953 mm	44.704 mm	SUPPORTS NEWTON-RAPHSON DIVISION; SUPPORTS PIPELINED OR FLOW-THROUGH OPERATION	NO	32	25 MHz			44.704 mm	CMOS	500 mA	5 V	Math Processors	2.54 mm	S-CPGA-P169		Not Qualified	NO	e0
AD9835BRU-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V		1	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.25 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	4.4 mm		NO	1	50 MHz		240	5 mm	CMOS		5 V	DSP Peripherals	.65 mm	R-PDSO-G16	1	Not Qualified	YES	e0
TMC3211H5C	Fairchild Semiconductor	DSP PERIPHERAL, DIVIDER	COMMERCIAL	PIN/PEG	120	PGA	SQUARE	PLASTIC/EPOXY	NO	5.25 V		32		GRID ARRAY		4.75 V	70 Cel	0 Cel	TIN LEAD	PERPENDICULAR	4.57 mm	34.545 mm		NO	32	20 MHz			34.545 mm	CMOS		5 V		2.54 mm	S-PPGA-P120		Not Qualified	NO	e0
AD9834BRU-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2.3 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.2 mm	4.4 mm		NO		50 MHz		240	6.5 mm	CMOS		2.5 V	DSP Peripherals	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e0
AD9858BSV	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.465 V				FLATPACK, THIN PROFILE, FINE PITCH		3.135 V	85 Cel	-40 Cel	TIN LEAD	QUAD	1.2 mm	14 mm		NO		2000 MHz		240	14 mm	CMOS		3.3 V		.5 mm	S-PQFP-G100	3	Not Qualified	YES	e0
AD9952YSVZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	7 mm		NO		400 MHz		260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	NO	e3
TMC2208N4C	Fairchild Semiconductor	DSP PERIPHERAL, MULTIPLIER ACCUMULATOR/SUMMER	COMMERCIAL	THROUGH-HOLE	48	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				5	IN-LINE	DIP48,.6		70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL										CMOS		5 V	DSP Peripherals	2.54 mm	R-PDIP-T48		Not Qualified		e0
VSC7173XYI	Maxim Integrated	DSP PERIPHERAL, MULTIPLIER		NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V			3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.27SQ,25	3 V		0 Cel		QUAD	.8 mm	7 mm		NO					7 mm	CMOS		3.3 V	Serial IO/Communication Controllers	.65 mm	S-XQCC-N32	3	Not Qualified	NO
TMC2208J4C	Fairchild Semiconductor	DSP PERIPHERAL, MULTIPLIER ACCUMULATOR/SUMMER	COMMERCIAL	THROUGH-HOLE	48	DIP	RECTANGULAR	CERAMIC	NO				5	IN-LINE	DIP48,.6		70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL										CMOS		5 V	DSP Peripherals	2.54 mm	R-XDIP-T48		Not Qualified		e0
ISL8700IBZ	Renesas Electronics	DSP PERIPHERAL, ADDRESS SEQUENCER		GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V				SMALL OUTLINE	SOP14,.25	2.5 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.75 mm	3.9 mm		NO					8.65 mm	CMOS	.4 mA			1.27 mm	R-PDSO-G14			NO	e3
ISL8700IBZ-T	Renesas Electronics	DSP PERIPHERAL, ADDRESS SEQUENCER		GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V				SMALL OUTLINE	SOP14,.25	2.5 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.75 mm	3.9 mm		NO					8.65 mm	CMOS	.4 mA			1.27 mm	R-PDSO-G14			NO	e3
AD9835BRU	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V		1	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.25 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	4.4 mm		NO	1	50 MHz		240	5 mm	CMOS		5 V	DSP Peripherals	.65 mm	R-PDSO-G16	1	Not Qualified	YES	e0
5962-9070801XC	Defense Logistics Agency	DSP PERIPHERAL, MULTIPLIER ACCUMULATOR/SUMMER	MILITARY	THROUGH-HOLE		DIP		CERAMIC, METAL-SEALED COFIRED	NO	5.5 V		19		IN-LINE		4.5 V	125 Cel	-55 Cel	GOLD	DUAL	3.81 mm	22.86 mm		NO	8				81.28 mm	CMOS		5 V		2.54 mm			Not Qualified	NO	e4
AD9834BRU-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2.3 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.2 mm	4.4 mm		NO		50 MHz		240	6.5 mm	CMOS		2.5 V	DSP Peripherals	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e0
AD9835BRU-REEL	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V		1	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.25 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	4.4 mm		NO	1	50 MHz		240	5 mm	CMOS		5 V	DSP Peripherals	.65 mm	R-PDSO-G16	1	Not Qualified	YES	e0
AD9952YSVZ-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	7 mm		NO		400 MHz		260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	NO	e3
AD9953YSVZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V				FLATPACK, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	7 mm		NO		400 MHz		260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e3
AD9953YSVZ-REEL7	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V				FLATPACK, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	MATTE TIN	QUAD	1.2 mm	7 mm		NO		400 MHz	40	260	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e3
AD9954YSV	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		1.71 V	105 Cel	-40 Cel	TIN LEAD	QUAD	1.2 mm	7 mm		NO		400 MHz		240	7 mm	CMOS		1.8 V		.5 mm	S-PQFP-G48	3	Not Qualified	YES	e0
AD9959BCPZ	Analog Devices	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	NO LEAD	56	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V		10		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V	85 Cel	-40 Cel	MATTE TIN	QUAD	1 mm	8 mm	ALSO REQUIRES 3.3V SUPPLY	NO	32	500 MHz		260	8 mm	CMOS		1.8 V		.5 mm	S-XQCC-N56	3	Not Qualified	YES	e3
QS29FCT520ATSO	Integrated Device Technology	DSP PERIPHERAL, PIPELINE REGISTER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				5	SMALL OUTLINE	SOP24,.4		70 Cel	0 Cel	TIN LEAD	DUAL							30	225		CMOS		5 V	DSP Peripherals	1.27 mm	R-PDSO-G24	1	Not Qualified		e0

DSP Peripherals

DSP (Digital Signal Processing) peripherals are electronic circuits that are designed to be used with DSP processors to perform specific tasks related to signal processing. DSP processors are used in a variety of applications, including audio and video processing, telecommunications, and image processing. DSP peripherals are designed to enhance the functionality of DSP processors by providing additional capabilities such as data acquisition, signal conditioning, and data conversion.

DSP peripherals can include analog-to-digital converters (ADCs), digital-to-analog converters (DACs), amplifiers, filters, and other signal conditioning circuits. These peripherals are used to acquire and condition signals before they are processed by the DSP processor. ADCs are used to convert analog signals, such as audio or video signals, into digital signals that can be processed by the DSP processor. DACs are used to convert digital signals back into analog signals, such as audio or video signals, for output.

DSP peripherals can also include hardware accelerators, which are used to offload computationally intensive tasks from the DSP processor. These hardware accelerators can include digital signal processors, graphics processing units, and other specialized hardware. By offloading these tasks, the DSP processor can focus on other tasks, resulting in improved performance and efficiency.