PE014012 by Tyco Electronics Elcon | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Tyco Electronics Elcon
Manufacturer's Part Number	PE014012
Description	POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: UL; VDE;
Datasheet	PE014012 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	5 A
Relay Function:	SPDT
DC Coil Release Voltage:	1.2 V
Maximum AC Contact Voltage:	400 V
Contact or Output Supply Type:	AC/DC
Relay Type:	POWER/SIGNAL RELAY
Coil or Input Supply Type:	DC
Termination Type:	SOLDER
Operate Time:	10 ms
Electrical Life:	100000 Cycle(s)
DC Coil Operate Voltage:	9 V
Release Time:	7 ms
Maximum Operating Temperature:	85 Cel
Manufacturer Series:	PE
Maximum DC Coil Current:	.018 A
Maximum AC Contact Current:	5 A
Packing Method:	BULK
Coil Resistance:	685 ohm
Sealing:	RT2
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT MOUNT
Relay Action:	MOMENTARY
Body Width:	10 inch
Maximum DC Coil Voltage:	12 V
Physical Dimension:	20mm X 10mm X 10mm
Body Height:	10 mm
Body Length/Diameter:	20 mm
Reference Standard:	UL; VDE
Maximum Contact AC Rating (R Load):	5A@400VAC
Coil Power (mW):	210

Popular Products

MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.