THS4131IDGKR by Texas Instruments | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	THS4131IDGKR
Description	OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
Datasheet	THS4131IDGKR Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	30
Low-Bias:	NO
Nominal Bandwidth (3dB):	80 MHz
Sub-Category:	Operational Amplifier
Surface Mount:	YES
Maximum Input Offset Voltage:	2000 uV
Technology:	BIPOLAR
Minimum Voltage Gain:	3548
Package Shape:	SQUARE
Terminal Form:	GULL WING
Package Code:	TSSOP
Amplifier Type:	OPERATIONAL AMPLIFIER
Nominal Slow Rate:	52 V/us
Moisture Sensitivity Level (MSL):	1
Architecture:	VOLTAGE-FEEDBACK
Packing Method:	TR
Programmable Power:	NO
Nominal Negative Supply Voltage (Vsup):	-5 V
Qualification:	Not Qualified
Package Equivalence Code:	TSSOP8,.19
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Maximum Seated Height:	1.1 mm
Frequency Compensation:	YES
Maximum Supply Voltage Limit:	16.5 V
Maximum Bias Current (IIB) @25C:	6 uA
Maximum Supply Current:	15 mA
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	8
Nominal Unity Gain Bandwidth:	150000 kHz
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Low-Offset:	NO
JESD-30 Code:	S-PDSO-G8
Maximum Operating Temperature:	85 Cel
Width:	3 mm
Nominal Common Mode Reject Ratio:	95 dB
Micropower:	NO
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Maximum Average Bias Current (IIB):	6 uA
No. of Functions:	1
Minimum Common Mode Reject Ratio:	80 dB
Length:	3 mm
Nominal Supply Voltage / Vsup (V):	5
Maximum Negative Supply Voltage Limit:	-16.5 V
Maximum Input Offset Current (IIO):	.5 uA
Power:	NO
Temperature Grade:	INDUSTRIAL
Wideband:	YES
Power Supplies (V):	+-5/+-15

Popular Products

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;

DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.

CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;

MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.