PCA9534ARGTRG4 by Texas Instruments | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	PCA9534ARGTRG4
Description	PARALLEL IO PORT, GENERAL PURPOSE; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet	PCA9534ARGTRG4 Datasheet

NAME	DESCRIPTION
Minimum Supply Voltage:	2.3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1 mm
Sub-Category:	Parallel IO Port
Surface Mount:	YES
Maximum Supply Current:	.175 mA
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	16
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
No. of I/O Lines:	8
Address Bus Width:	8
Technology:	CMOS
JESD-30 Code:	S-PQCC-N16
Maximum Clock Frequency:	.4 MHz
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Width:	3 mm
Moisture Sensitivity Level (MSL):	2
No. of Bits:	8
No. of Ports:	1
Peripheral IC Type:	PARALLEL IO PORT, GENERAL PURPOSE
Maximum Supply Voltage:	5.5 V
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Qualification:	Not Qualified
Package Equivalence Code:	LCC16,.12SQ,20
Length:	3 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	2.5/5

Popular Products

BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.