LM5146RGYR by Texas Instruments | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	LM5146RGYR
Description	SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
Datasheet	LM5146RGYR Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Control Mode:	VOLTAGE-MODE
Maximum Time At Peak Reflow Temperature (s):	30
Width (mm):	3.5 mm
Maximum Seated Height:	1 mm
Maximum Output Current:	20 A
Maximum Supply Current (Isup):	2.1 mA
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Outputs:	1
Switcher Config:	BUCK
No. of Terminals:	20
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
JESD-30 Code:	R-PQCC-N20
Package Shape:	RECTANGULAR
Terminal Form:	NO LEAD
Maximum Operating Temperature:	150 Cel
Package Code:	HVQCCN
Minimum Output Voltage:	.8 V
Control Technique:	PULSE WIDTH MODULATION
Moisture Sensitivity Level (MSL):	2
Maximum Switching Frequency:	1000 kHz
Minimum Input Voltage:	5.5 V
Maximum Input Voltage:	100 V
Maximum Output Voltage:	60 V
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	LCC20,.15X.19,20
Nominal Input Voltage:	48 V
Other IC type:	SWITCHING CONTROLLER
Length:	4.5 mm
Peak Reflow Temperature (C):	260
Temperature Grade:	AUTOMOTIVE

Popular Products

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;