Image shown is a representation only.
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer's Part Number | DCP010505BP |
| Description | DC-DC UNREGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 7; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; |
| Datasheet | DCP010505BP Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Package Body Material: | PLASTIC/EPOXY |
| Maximum Line Regulation: | 15 % |
| Nominal Output Voltage: | 5 V |
| Control Mode: | VOLTAGE-MODE |
| Trim or Adjustable Output (V): | NO |
| Width (mm): | 7.62 mm |
| Maximum Seated Height: | 5.33 mm |
| Maximum Output Current: | .2 A |
| Maximum Total Power Output: | 1 W |
| Sub-Category: | Other Analog ICs |
| Surface Mount: | NO |
| Terminal Finish: | NICKEL PALLADIUM GOLD |
| No. of Outputs: | 1 |
| Switcher Config: | PUSH-PULL |
| No. of Terminals: | 7 |
| Terminal Position: | DUAL |
| Package Style (Meter): | IN-LINE |
| Maximum Load Regulation: | 31 % |
| Technology: | BCDMOS |
| JESD-30 Code: | R-PDIP-T7 |
| Package Shape: | RECTANGULAR |
| Terminal Form: | THROUGH-HOLE |
| Maximum Operating Temperature: | 100 Cel |
| Package Code: | DIP |
| Minimum Output Voltage: | 4.75 V |
| Minimum Input Voltage: | 4.5 V |
| Maximum Input Voltage: | 5.5 V |
| Maximum Output Voltage: | 5.25 V |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -40 Cel |
| No. of Functions: | 1 |
| Qualification: | Not Qualified |
| Package Equivalence Code: | DIP7/14,.3 |
| Nominal Input Voltage: | 5 V |
| Other IC type: | DC-DC UNREGULATED POWER SUPPLY MODULE |
| Length: | 19.18 mm |
| Main Out Ripple Voltage: | .007 Vrms |
| Terminal Pitch: | 2.54 mm |
| Main Output Efficiency: | 80 % |
| Temperature Grade: | INDUSTRIAL |
