Image shown is a representation only.
| Manufacturer | TE Connectivity |
|---|---|
| Manufacturer's Part Number | JWD-171-25 |
| Description | DRY REED RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPST; Coil or Input Supply Type: DC; Reference Standard: CSA; UL; |
| Datasheet | JWD-171-25 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Nominal Coil Voltage: | 6 V |
| Maximum DC Contact Current: | .5 A |
| Relay Function: | DPST |
| DC Coil Release Voltage: | .5 V |
| Dielectric Strength Between Open Contacts: | 250 Vrms |
| Contact or Output Supply Type: | DC |
| Maximum Contact DC Rating (R Load): | .5A@100VDC |
| Relay Type: | DRY REED RELAY |
| No. of Terminals: | 8 |
| Coil or Input Supply Type: | DC |
| Relay Form: | 2 FORM A |
| Termination Type: | SOLDER/QUICK CONNECT |
| Operate Time: | 1.5 ms |
| Electrical Life: | 1000000 Cycle(s) |
| DC Coil Operate Voltage: | 3.8 V |
| Release Time: | .5 ms |
| Maximum Operating Temperature: | 85 Cel |
| Contact Resistance: | 200 mohm |
| Insulation Resistance: | 100000000 ohm |
| Input Switching Control Type: | Random |
| Maximum DC Coil Current: | .03 A |
| Maximum AC Contact Current: | .5 A |
| End Contact Material: | RUTHENIUM |
| Maximum DC Contact Voltage: | 20 V |
| PCB Hole Count: | 8 |
| Maximum Contact DC Power Rating (R Load): | 10W@20VDC |
| Packing Method: | BOX; TRAY |
| Coil Resistance: | 200 ohm |
| Sealing: | EPOXY TERMINAL SEALED |
| Minimum Operating Temperature: | -35 Cel |
| Weight: | 2.3 g |
| Mounting Feature: | PANEL MOUNT |
| Relay Action: | MOMENTARY |
| Body Width: | 7.62 inch |
| Maximum DC Coil Voltage: | 6 V |
| Dielectric Strength Between Coil & Contacts: | 500 Vrms |
| Terminal Length: | .1299 inch |
| Physical Dimension: | 19.56mm x 7.62mm x 8mm |
| Body Height: | 8 mm |
| Additional Features: | WITH SUPPRESSION DIODE |
| Body Length/Diameter: | 19.56 mm |
| Reference Standard: | CSA; UL |
| Coil Power (mW): | 180 |
