1-1825010-4 by TE Connectivity | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	1-1825010-4
Description	SLIDE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PDT; Type (Actuator): EXTENDED TOP TYPE; Contact Function: ON-ON; Angle (Actuator): 0 deg;
Datasheet	1-1825010-4 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.4 A
No. of Positions:	4
Center Contact Plating:	GOLD
Center Contact Material:	COPPER ALLOY
No. of Independent Keys:	1
Type (Actuator):	EXTENDED TOP TYPE
Maximum AC Contact Voltage:	20 V
Actuator Travel (mm):	2.794
Switch Action:	LATCHED
Terminal Material:	COPPER ALLOY
Termination Type:	SOLDER
Electrical Life:	15000 Cycle(s)
Maximum Operating Temperature:	80 Cel
Material (Actuator):	NYLON
Contact Resistance:	40 mohm
Insulation Resistance:	1000000000 ohm
Color (Actuator):	NATURAL
Maximum AC Contact Current:	.4 A
End Contact Material:	COPPER ALLOY
Angle (Actuator):	0 deg
Maximum DC Contact Voltage:	20 V
DC Maximum Rating R Load (Contact):	.3A@115VDC
Dielectric Withstand Volts (V):	600VRMS
Contact Function:	ON-ON
PCB Hole Count:	8
DC Maximum Power Rating R Load (Contact):	0.4VA@20VDC
Packing Method:	TUBE
Switch Type:	SLIDE SWITCH
AC Maximum Rating R Load (Contact):	.02A@20VAC
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	PANEL MOUNT
Body Width:	7.37 inch
Switch Function:	4PDT
Terminal Length:	.16 inch
Length (Actuator):	.11 inch
End Contact Plating:	GOLD OVER NICKEL
Body Height:	4.45 mm
Additional Features:	ROHS COMPLIANT
Body Length/Diameter:	17.78 mm

Popular Products

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.

LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;