I6A4W020A033V-000-R by TDK | Vyrian | Semiconductor & Electronic Component Distributor | I6A4W020A033V-000-R Other Function Semiconductors

Image shown is a representation only.

Manufacturer	TDK
Manufacturer's Part Number	I6A4W020A033V-000-R
Description	DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 11; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO;
Datasheet	I6A4W020A033V-000-R Datasheet

NAME	DESCRIPTION
Package Body Material:	UNSPECIFIED
Maximum Line Regulation:	.4 %
Control Mode:	VOLTAGE-MODE
Trim or Adjustable Output (V):	YES
Protection(s):	OVER CURRENT
Width (mm):	22.9 mm
Maximum Seated Height:	12.1 mm
Maximum Output Current:	20 A
Maximum Total Power Output:	250 W
Surface Mount:	NO
No. of Outputs:	1
No. of Terminals:	11
Terminal Position:	UNSPECIFIED
Package Style (Meter):	MICROELECTRONIC ASSEMBLY
Maximum Load Regulation:	1.2 %
Technology:	HYBRID
JESD-30 Code:	R-XDMA-P11
Package Shape:	RECTANGULAR
Terminal Form:	PIN/PEG
Maximum Operating Temperature:	125 Cel
Package Code:	DMA
Minimum Output Voltage:	3.3 V
Minimum Input Voltage:	9 V
Maximum Input Voltage:	53 V
Maximum Output Voltage:	15 V
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Nominal Input Voltage:	8 V
Other IC type:	DC-DC REGULATED POWER SUPPLY MODULE
Length:	33 mm
Main Out Ripple Voltage:	.007 Vrms
Main Output Efficiency:	97 %
Temperature Grade:	INDUSTRIAL

Popular Products

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.