SC-SATG11 by SIIG, Inc | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	SIIG, Inc
Manufacturer's Part Number	SC-SATG11
Description	SIIG; Product Model: CN2524; Product Type: Serial ATA/Gigabit Ethernet Adapter; Host Interface: PCI; Form Factor: Plug-in Card; Card Height: Low-profile;

SC-SATG11 Technical Details

NAME	DESCRIPTION
Data Transfer Rate:	150 MB/s, 1000 MB/s, 100 MB/s, 10 MB/s
Number of Physical Drive Supported:	2
Certifications & Standards:	FCC Class B (DoC) CE IEEE 802.3 IEEE 802.3u IEEE 802.3ab
Product Name:	CN2524 SATA+GigaLAN Combo Adapter
Controller Type:	Serial ATA/150
Input Voltage:	3 V DC, 5 V DC
Platform Supported:	PC
Limited Warranty:	5 Year
Brand Name:	SIIG
Number of SATA Ports (Internal):	1
Form Factor:	Plug-in Card
Package Contents:	CN2524 SATA+GigaLAN Combo Adapter Serial ATA cable SATA 15-pin power cable Driver CD User's manual
Additional Information:	Chipset: Serial ATA - SiI3512 Gigabit Ethernet - RealTek 8169S Serial ATA: Features independent 256-byte FIFOs per channel for host reads and writes Co-exists with on-board Ultra ATA controller Features Watch Dog timer for fault resiliency Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future 10/100/1000 (Gigabit) Ethernet: Supports Full Duplex Flow Control (IEEE 802.3x) Integrated 10/100/1000 transceiver Auto-Negotiation with Next page capability Supports pair swap/polarity/skew correction Crossover Detection & Auto-Correction Transmit/Receive FIFO (8K/64K) support Supports IEEE 802.1Q VLAN tagging
Marketing Information:	Combo card design adds Serial ATA and Gigabit Ethernet interface into your computer at once! Supports two Serial ATA hard disk drives with high-speed data transfer rates up to 150MB/sec Gigabit Ethernet supports up 1000 Mbps and backwards compatible with 10/100 Mbps networks
Product Type:	Serial ATA/Gigabit Ethernet Adapter
Host Interface:	PCI
Card Height:	Low-profile
System Requirements:	Pentium or equivalent PC computer with one available PCI slot
Total Number of SATA Ports:	2
Number of SATA Ports (External):	1
Product Model:	CN2524
Compatibility:	Plug and Play Supported Operating System: Windows 98 Windows 98SE Windows ME Windows NT 4.0 with Sp6 or later Windows 2000 with Sp3 or later Windows XP Windows 2003 Server
Number of Network (RJ-45) Ports:	1

Popular Products

2N7002

Teledyne Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;

2N7002

Vishay Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;

2N2222A

Micropac Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

MMBF170LT1G

Onsemi

MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.