Onsemi - NUF2450MUT2G

FERRITE CHIP; Maximum DC Resistance: .0016 ohm; Rated Current: 12 A; Dimensions: L3.2XB1.6XH1.1 (mm)/L0.126XB0.063XH0.043 (inch); Minimum Operating Temperature: -55 Cel; No. of Terminals: 2;

FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: 1 A; Height: .8 mm; Minimum Operating Temperature: -55 Cel; Length: 1.6 mm;

FEED THROUGH CAPACITOR; Rated Current: .3 A; Minimum Insulation Resistance: 1000 Mohm; No. of Functions: 1; Height: .7 mm; Dimensions: L3.2XB1.25XH0.7 (mm)/L0.126XB0.049XH0.028 (inch);

Wurth Elektronik 74279223560 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 10A current. It operates b/w -55 to 125°C, covering frequencies from 100 MHz to 1 GHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.

Wurth Elektronik 742792031 is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2.0XB1.25XH0.9 (mm), it operates b/w -55 to 125 °C and has an output impedance of 300 OHM. Ideal for data line filtering applications due to its surface mount construction and frequency range of 100-200 MHz.

BLM21PG221SN1B by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max frequency of 100MHz and DC resistance of 0.05 ohm. Ideal for data line filtering applications due to its ferrite chip construction and output impedance of 220 ohm at rated current of 2A.

DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Length: 3 mm; Packing Method: TAPE AND REEL; Approvals (V): IEC; Terminal Finish: NICKEL PALLADIUM GOLD;

Murata Manufacturing's BLM21PG600SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications, this surface mount component has a rated current of 3A and uses ferrite material for effective noise suppression.

Taiyo Yuden's FBMH1608HM601-TV is a Ferrite Chip Data Line Filter with 2 terminals, rated for 0.9A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers 600 ohm output impedance and operates b/w -40 to 125°C. Ideal for surface mount applications in various electronic devices requiring noise suppression.

Murata BLM15AG100SN1D is a chip bead data line filter with 2 terminals, rated for 1A current. It offers a DC resistance of 0.025 ohm and output impedance of 10 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronics to suppress noise and interference.

Murata Manufacturing's DLW21HN900SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a min insulation resistance of 10 Mohm and max operating temperature of 85°C. Ideal for applications requiring filtering in data lines with dimensions of L2.0xB1.2xH0.9 (mm).

DATA LINE FILTER; Maximum DC Resistance: .88 ohm; Length: 2 mm; Output Impedance (ohm): 800 OHM; Maximum Operating Temperature: 125 Cel; No. of Terminals: 4;

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1.4 A;

The TDK MPZ2012S601A is an 0805 chip bead data line filter with a ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.1 ohm, and output impedance of 600 ohm. Ideal for applications requiring noise suppression in data lines at frequencies up to 100 MHz.

BKP2125HS600-TV by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals, rated for 3A current. It offers a max DC resistance of 0.025 ohm and an output impedance of 60 ohm. Ideal for surface mount applications in electronics, it operates b/w -55 to 85 °C temperatures.

Wurth Elektronik 74279265 is a 0603 multi-layer FERRITE CHIP filter with dimensions of L1.6xB0.8xH0.8 mm. It has a max operating temp of 125°C, min freq of 100 MHz, and DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its surface mounting type and ferrite material construction.

Wurth Elektronik 744231091 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has 4 terminals, tin finish, and dimensions of L2.0xB1.2xH1.2 (mm). Ideal for applications requiring filtering in data lines with a current rating of 0.37A.

Wurth Elektronik 744242510 is a Data Line Filter with UL approval, rated voltage of 80V, and inductance of 51uH. It has 2 functions, operates b/w -40°C to 125°C, and offers a max DC resistance of 0.32 ohm. This filter is ideal for applications requiring noise suppression in data lines.

Murata Manufacturing's BLM18EG471SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of 1.6x0.8x0.8 mm, it offers a max frequency of 1000 MHz and DC resistance of 0.21 ohm. Ideal for surface mount applications in electronics requiring impedance control up to 550 OHM at frequencies ranging from 100 MHz to 1000 MHz.

HI1206N101R-10 by Laird Technologies is a chip bead data line filter with 2 terminals. It operates b/w -40 to 125 °C, offering a DC resistance of 0.035 ohm and output impedance of 100 OHM. Ideal for applications requiring noise suppression in the frequency range of 25-1000 MHz.