Image shown is a representation only.
| Manufacturer | Onsemi |
|---|---|
| Manufacturer's Part Number | CAT24C64LI |
| Description | EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; No. of Ports: 1; |
| Datasheet | CAT24C64LI Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Package Body Material: | PLASTIC/EPOXY |
| Maximum Standby Current: | .000001 Amp |
| Organization: | 8KX8 |
| Maximum Time At Peak Reflow Temperature (s): | NOT SPECIFIED |
| Maximum Seated Height: | 5.33 mm |
| Minimum Supply Voltage (Vsup): | 1.7 V |
| Sub-Category: | EEPROMs |
| Surface Mount: | NO |
| Maximum Supply Current: | 2 mA |
| Maximum Write Cycle Time (tWC): | 5 ms |
| No. of Terminals: | 8 |
| I2C Control Byte: | 1010DDDR |
| Maximum Clock Frequency (fCLK): | 1 MHz |
| No. of Words: | 8192 words |
| Terminal Position: | DUAL |
| Package Style (Meter): | IN-LINE |
| Write Protection: | HARDWARE |
| Technology: | CMOS |
| JESD-30 Code: | R-PDIP-T8 |
| Package Shape: | RECTANGULAR |
| Terminal Form: | THROUGH-HOLE |
| Operating Mode: | SYNCHRONOUS |
| Maximum Operating Temperature: | 85 Cel |
| Endurance: | 1000000 Write/Erase Cycles |
| Package Code: | DIP |
| Width: | 7.62 mm |
| Serial Bus Type: | I2C |
| No. of Ports: | 1 |
| Memory Density: | 65536 bit |
| Memory IC Type: | EEPROM |
| Minimum Operating Temperature: | -40 Cel |
| Memory Width: | 8 |
| No. of Functions: | 1 |
| Qualification: | Not Qualified |
| Package Equivalence Code: | DIP8,.3 |
| Length: | 9.27 mm |
| No. of Words Code: | 8K |
| Nominal Supply Voltage / Vsup (V): | 3.3 |
| Minimum Data Retention Time: | 100 |
| Peak Reflow Temperature (C): | NOT SPECIFIED |
| Parallel or Serial: | SERIAL |
| Terminal Pitch: | 2.54 mm |
| Temperature Grade: | INDUSTRIAL |
| Maximum Supply Voltage (Vsup): | 5.5 V |
| Power Supplies (V): | 2/5 |
