A6A-16CS by Omron | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Omron
Manufacturer's Part Number	A6A-16CS
Description	ROTARY CODED SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: HEXADECIMAL COMPLEMENT; Type (Actuator): SHAFT TYPE; Contact Function: ON-ON; Dielectric Withstand Volts (V): 500VAC;
Datasheet	A6A-16CS Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.1 A
No. of Positions:	16
Center Contact Plating:	GOLD OVER SILVER
Center Contact Material:	PHOSPHOR BRONZE
Length (Bushing):	0 inch
Type (Actuator):	SHAFT TYPE
Switch Action:	LATCHED
Terminal Material:	BERYLLIUM COPPER
Termination Type:	SOLDER
Electrical Life:	2000 Cycle(s)
Maximum Operating Temperature:	70 Cel
Material (Actuator):	POLYACETAL
Contact Resistance:	200 mohm
Insulation Resistance:	10000000 ohm
End Contact Material:	PHOSPHOR BRONZE
No. of Switch Sections:	1
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	.1A@28VDC
Dielectric Withstand Volts (V):	500VAC
Contact Function:	ON-ON
PCB Hole Count:	5
Switch Type:	ROTARY CODED SWITCH
Indexing Angle:	22.5 deg
Minimum Operating Temperature:	-10 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	10 inch
Switch Function:	HEXADECIMAL COMPLEMENT
Contact Timing:	BREAK-BEFORE-MAKE
Terminal Length:	.126 inch
Length (Actuator):	.287 inch
End Contact Plating:	GOLD OVER SILVER
Insulator Material:	POLYBUTYLENE TEREPHTHALATE
Body Height:	5.9 mm
Additional Features:	WITH O-RING
Body Length/Diameter:	10 mm

Popular Products

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.

DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.