SAA7103H by NXP Semiconductors | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	NXP Semiconductors
Manufacturer's Part Number	SAA7103H
Description	COLOR SIGNAL ENCODER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE;
Datasheet	SAA7103H Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	2.1 mm
Minimum Supply Voltage (Vsup):	3.15 V
Sub-Category:	Other Consumer ICs
Surface Mount:	YES
Maximum Supply Current:	230 mA
No. of Terminals:	44
Terminal Position:	QUAD
Package Style (Meter):	FLATPACK
Technology:	CMOS
JESD-30 Code:	S-PQFP-G44
Package Shape:	SQUARE
Terminal Form:	GULL WING
Video Standard:	PAL; NTSC
Maximum Operating Temperature:	70 Cel
Package Code:	QFP
General IC Type:	COLOR SIGNAL ENCODER
Width:	10 mm
Input Type:	RGB
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	QFP44,.52SQ,32
Length:	10 mm
Additional Features:	INPUT TYPE CAN ALSO ACCEPTS YCRCB
Peak Reflow Temperature (C):	260
Terminal Pitch:	.8 mm
Temperature Grade:	COMMERCIAL
Maximum Supply Voltage (Vsup):	3.45 V
Power Supplies (V):	3.3

Popular Products

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.