Image shown is a representation only.
| Manufacturer | Nkk Switches |
|---|---|
| Manufacturer's Part Number | B29AH |
| Description | TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: DPDT; Type (Actuator): TOGGLE BAT; Contact Function: ON-OFF-(ON); Electrical Life: 50000 Cycle(s); |
| Datasheet | B29AH Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Center Contact Plating: | GOLD |
| Center Contact Material: | PHOSPHOR BRONZE |
| Type (Bushing): | UNTHREADED |
| Length (Bushing): | .106 inch |
| Type (Actuator): | TOGGLE BAT |
| Terminal Finish: | GOLD |
| Finish (Actuator): | NICKEL |
| Switch Action: | MOMENTARY |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 50000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Material (Actuator): | BRASS |
| Contact Resistance: | 50 mohm |
| Insulation Resistance: | 500000000 ohm |
| End Contact Material: | COPPER ALLOY |
| Angle (Actuator): | 26 deg |
| Dielectric Withstand Volts (V): | 500VAC |
| Contact Function: | ON-OFF-(ON) |
| PCB Hole Count: | 8 |
| DC Maximum Power Rating R Load (Contact): | 0.4VA@28VDC |
| Switch Type: | TOGGLE SWITCH |
| Sealing: | EPOXY |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 8.7884 inch |
| Switch Function: | DPDT |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Terminal Length: | .122 inch |
| Length (Actuator): | .394 inch |
| End Contact Plating: | GOLD |
| Insulator Material: | GLASS FILLED POLYAMIDE |
| Body Height: | 13.716 mm |
| Body Length/Diameter: | 8.7884 mm |
| Diameter (Bushing): | .236 inch |
