MAX6964AEG by Maxim Integrated | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Maxim Integrated
Manufacturer's Part Number	MAX6964AEG
Description	LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR;
Datasheet	MAX6964AEG Datasheet

NAME	DESCRIPTION
Minimum Supply Voltage:	2 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Seated Height:	1.75 mm
Display Mode:	SEGMENT
Data Input Mode:	SERIAL
Sub-Category:	Display Drivers
Surface Mount:	YES
Terminal Finish:	TIN LEAD
No. of Terminals:	24
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, SHRINK PITCH
Technology:	BICMOS
JESD-30 Code:	R-PDSO-G24
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Minimum fmax:	.4 MHz
Maximum Operating Temperature:	125 Cel
Package Code:	SSOP
Interface IC Type:	LED DISPLAY DRIVER
Width:	3.9 mm
Moisture Sensitivity Level (MSL):	1
Maximum Supply Voltage:	3.6 V
JESD-609 Code:	e0
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SSOP24,.24
Length:	8.65 mm
Multiplexed Display Capability:	NO
Additional Features:	COMMON-ANODE
Terminal Pitch:	.635 mm
Temperature Grade:	AUTOMOTIVE
No. of Segments:	17
Power Supplies (V):	3.3

Popular Products

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;