KLB1 by Lumberg Connect | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Lumberg Connect
Manufacturer's Part Number	KLB1
Description	2.5mm AUDIO; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Minimum Operating Temperature: -20 Cel;
Datasheet	KLB1 Datasheet

NAME	DESCRIPTION
Configuration:	1X1 VERTICAL
IEC Conformity:	NO
Sub-Category:	Audio/RCA Connector
MIL Conformity:	NO
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	70
Body Length:	.378 inch
Contact Gender:	MALE
Connector Type:	2.5mm AUDIO
Contact Material:	BRONZE
Mounting Option-1:	LOCKING
Contact Resistance:	20 mohm
Insulation Resistance:	100000000 ohm
Mounting Style:	STRAIGHT
Audio Type:	MONO
No. of Ports:	1
Contact Style:	RND PIN-SKT
Durability:	5000 Cycles
Mounting Type:	CABLE
Body Depth:	.453 inch
Minimum Operating Temperature:	-20 Cel
Body Width:	.283 inch
Terminal Length:	.197 inch
Rated Current - Signal:	.5 A
No. of Connectors:	ONE
Insulator Material:	POLYCARBONATE
Additional Features:	STANDARD: UL 94V-2, PC
Reference Standard:	UL
Option:	GENERAL PURPOSE
No. of Poles:	2
Body or Shell Style:	SOCKET
Reliability:	COMMERCIAL
DIN Conformance:	NO

Popular Products

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;