MPA306F by Knitter-switch | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Knitter-switch
Manufacturer's Part Number	MPA306F
Description	PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 3PDT; Type (Actuator): PUSHBUTTON; Contact Function: (ON)-ON; Terminal Material: BRASS;
Datasheet	MPA306F Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	4 A
Center Contact Material:	SILVER
Type (Bushing):	M6X0.75
Length (Bushing):	.295 inch
Housing Material:	STAINLESS STEEL
Type (Actuator):	PUSHBUTTON
Maximum AC Contact Voltage:	250 V
Terminal Finish:	Silver (Ag)
Finish (Actuator):	CHROME
Actuator Travel (mm):	3.5052
Switch Action:	MOMENTARY
Terminal Material:	BRASS
Termination Type:	QUICK CONNECT
Maximum Operating Temperature:	140 Cel
Material (Actuator):	COPPER ALLOY
Contact Resistance:	20 mohm
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	3 A
End Contact Material:	SILVER
Angle (Actuator):	0 deg
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	4A@30VDC
Dielectric Withstand Volts (V):	1500VAC
Contact Function:	(ON)-ON
Switch Type:	PUSHBUTTON SWITCH
AC Maximum Rating R Load (Contact):	3A@250VAC
Sealing:	EPOXY
JESD-609 Code:	e4
Minimum Operating Temperature:	-45 Cel
Mounting Feature:	PANEL MOUNT
Body Width:	13.0048 inch
Switch Function:	3PDT
Contact Timing:	MAKE-BEFORE-BREAK
Terminal Length:	.157 inch
Length (Actuator):	.374 inch
Insulator Material:	DIALLYL PHTHALATE
Body Height:	20.0914 mm
Body Length/Diameter:	17.8054 mm
Diameter (Bushing):	.236 inch

Popular Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.

DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;