Image shown is a representation only.
| Manufacturer | ITT Cannon |
|---|---|
| Manufacturer's Part Number | 7101SYCQE |
| Description | TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): TOGGLE BAT; Contact Function: ON-ON; Solderability: MIL-STD; |
| Datasheet | 7101SYCQE Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | 5 A |
| Center Contact Plating: | SILVER |
| Center Contact Material: | COPPER ALLOY |
| Type (Bushing): | 1/4-40 |
| Length (Bushing): | .35 inch |
| Housing Material: | STAINLESS STEEL |
| Type (Actuator): | TOGGLE BAT |
| Maximum AC Contact Voltage: | 120 V |
| Solderability: | MIL-STD |
| Terminal Finish: | Silver (Ag) |
| Finish (Actuator): | BRIGHT CHROME |
| Switch Action: | LATCHED |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 100000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Manufacturer Series: | 7000 |
| Material (Actuator): | BRASS |
| Contact Resistance: | 10 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | 5 A |
| End Contact Material: | SILVER |
| Angle (Actuator): | 25 deg |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | 5A@28VDC |
| Dielectric Withstand Volts (V): | 1000VRMS |
| Contact Function: | ON-ON |
| PCB Hole Count: | 3 |
| Switch Type: | TOGGLE SWITCH |
| AC Maximum Rating R Load (Contact): | 5A@120VAC |
| Sealing: | EPOXY TERMINAL SEALED |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Body Width: | 6.86 inch |
| Switch Function: | SPDT |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Terminal Length: | .25 inch |
| Length (Actuator): | .41 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | GLASS FILLED NYLON |
| Body Height: | 8.89 mm |
| Body Length/Diameter: | 12.7 mm |
| Diameter (Bushing): | .25 inch |
