WM72016-6-DGTR by Infineon Technologies | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Infineon Technologies
Manufacturer's Part Number	WM72016-6-DGTR
Description	FRAM-EMBEDDED; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Additional Features: 500KV ESD AVAILABLE; Maximum Operating Temperature: 85 Cel;
Datasheet	WM72016-6-DGTR Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Organization:	1KX16
Maximum Seated Height:	.65 mm
Minimum Supply Voltage (Vsup):	2.1 V
Surface Mount:	YES
Maximum Supply Current:	.025 mA
No. of Terminals:	8
No. of Words:	1024 words
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
Write Protection:	HARDWARE
Technology:	CMOS
JESD-30 Code:	S-PDSO-N8
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Operating Mode:	SYNCHRONOUS
Maximum Operating Temperature:	85 Cel
Endurance:	100000000000000 Write/Erase Cycles
Package Code:	HVSON
Width:	3 mm
Moisture Sensitivity Level (MSL):	1
Memory Density:	16384 bit
Minimum Standby Voltage:	2.1 V
Memory IC Type:	FRAM-EMBEDDED
Minimum Operating Temperature:	-40 Cel
Memory Width:	16
No. of Functions:	1
Package Equivalence Code:	SOLCC8.12SQ,25
Length:	3 mm
No. of Words Code:	1K
Nominal Supply Voltage / Vsup (V):	2.5
Additional Features:	500KV ESD AVAILABLE
Minimum Data Retention Time:	20
Parallel or Serial:	SERIAL
Terminal Pitch:	.65 mm
Maximum Supply Voltage (Vsup):	3 V

Popular Products

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;