Honeywell Sensing And Control - 7SE1

7SE1 by Honeywell Sensing And Control

Image shown is a representation only.

Manufacturer	Honeywell Sensing And Control
Manufacturer's Part Number	7SE1
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STEEL PLUNGER; Body Width: 8.788 inch; Maximum DC Contact Voltage: 250 V;
Datasheet	7SE1 Datasheet

7SE1 Technical Details

NAME	DESCRIPTION
Maximum DC Contact Current:	5 A
Maximum DC Contact Voltage:	250 V
DC Maximum Rating R Load (Contact):	5A@250VDC
Maximum Operating Force:	2.22 N
Type (Actuator):	STEEL PLUNGER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	250 V
Maximum Pre Travel:	1.27 mm
AC Maximum Rating R Load (Contact):	5A@250VAC
Sealing:	CORROSION PROOF
Mounting Feature:	PANEL MOUNT
Actuator Travel (mm):	1.35
Body Width:	8.788 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	WIRE
Body Height:	15.24 mm
Body Length/Diameter:	22.26 mm
Maximum AC Contact Current:	5 A

Powered by Partstack

Popular Products

1N4148

Rochester Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

BAV99

Nexperia

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

1N4148

Frontier Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

BSS138-7-F

Diodes Incorporated

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

SMMBT2222ALT1G

Onsemi

SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.

2N2222A

Infineon Technologies

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

LM78L05ACMX/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Category Top Products