Image shown is a representation only.
| Manufacturer | Fujitsu |
|---|---|
| Manufacturer's Part Number | NA-5W-K |
| Description | POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL; |
| Datasheet | NA-5W-K Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Nominal Coil Voltage: | 5 V |
| Maximum DC Contact Current: | 2 A |
| Relay Function: | DPDT |
| DC Coil Release Voltage: | .5 V |
| Maximum AC Contact Voltage: | 250 V |
| Dielectric Strength Between Open Contacts: | 1000 Vrms |
| Contact or Output Supply Type: | AC/DC |
| Maximum Contact DC Rating (R Load): | 2A@220VDC |
| Terminal Finish: | Tin/Silver/Copper (Sn/Ag/Cu) - hot dipped |
| Relay Type: | POWER/SIGNAL RELAY |
| No. of Terminals: | 8 |
| Coil or Input Supply Type: | DC |
| Relay Form: | 2 FORM C |
| Termination Type: | SOLDER |
| Operate Time: | 6 ms |
| Electrical Life: | 200000 Cycle(s) |
| DC Coil Operate Voltage: | 3.75 V |
| Release Time: | 4 ms |
| Maximum Operating Temperature: | 85 Cel |
| Contact Resistance: | 50 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Input Switching Control Type: | Random |
| Maximum DC Coil Current: | .028 A |
| Maximum AC Contact Current: | 2 A |
| End Contact Material: | Silver Palladium |
| Maximum DC Contact Voltage: | 220 V |
| PCB Hole Count: | 8 |
| Coil Resistance: | 178 ohm |
| Sealing: | PLASTIC SEALED |
| JESD-609 Code: | e1 |
| Minimum Operating Temperature: | -40 Cel |
| Weight: | 1.5 g |
| Mounting Feature: | THROUGH HOLE-STRAIGHT MOUNT |
| Relay Action: | MOMENTARY |
| Body Width: | 7.4 inch |
| Maximum DC Coil Voltage: | 5 V |
| Dielectric Strength Between Coil & Contacts: | 1500 Vrms |
| Terminal Length: | .1181 inch |
| End Contact Plating: | GOLD |
| Physical Dimension: | 14.9mm x 7.4mm x 9.7mm |
| Body Height: | 9.7 mm |
| Body Length/Diameter: | 14.9 mm |
| Reference Standard: | CSA; UL |
| Maximum Contact AC Rating (R Load): | 2A@250VAC |
| Coil Power (mW): | 140 |
