OS102011MA1QN1C by C & K Components | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	C & K Components
Manufacturer's Part Number	OS102011MA1QN1C
Description	SLIDE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SLIDE; Contact Function: ON-ON; Switch Action: LATCHED;
Datasheet	OS102011MA1QN1C Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.1 A
No. of Positions:	2
Center Contact Plating:	SILVER
Center Contact Material:	BRASS
Type (Actuator):	SLIDE
Terminal Finish:	SILVER
Switch Action:	LATCHED
Terminal Material:	BRASS
Termination Type:	SOLDER
Electrical Life:	10000 Cycle(s)
Maximum Operating Temperature:	70 Cel
Material (Actuator):	POLYOXYMETHYLENE
Contact Resistance:	20 mohm
Insulation Resistance:	100000000 ohm
Color (Actuator):	BLACK
End Contact Material:	COPPER ALLOY
Maximum DC Contact Voltage:	12 V
DC Maximum Rating R Load (Contact):	.1A@12VDC
Dielectric Withstand Volts (V):	500VAC
Contact Function:	ON-ON
PCB Hole Count:	5
Packing Method:	BULK
Switch Type:	SLIDE SWITCH
JESD-609 Code:	e4
Minimum Operating Temperature:	-10 Cel
Mounting Feature:	THROUGH HOLE-RIGHT ANGLE
Body Width:	4.7 inch
Switch Function:	SPDT
Length (Actuator):	.157 inch
Insulator Material:	PHENOLIC
Body Height:	4.4 mm
Body Length/Diameter:	8.6 mm

Popular Products

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.

LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);

LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;