Image shown is a representation only.
| Manufacturer | C & K Components |
|---|---|
| Manufacturer's Part Number | MB05L2NCGD |
| Description | ROTARY SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DP5T; Type (Actuator): SCREW DRIVER SLOT, FLUSH; Dielectric Withstand Volts (V): 600VRMS; Additional Features: PANEL MOUNTABLE; |
| Datasheet | MB05L2NCGD Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .25 A |
| No. of Positions: | 5 |
| Center Contact Plating: | SILVER |
| Center Contact Material: | COPPER ALLOY |
| Type (Bushing): | 1/4-28 |
| Length (Bushing): | .25 inch |
| Housing Material: | ZINC ALLOY |
| Type (Actuator): | SCREW DRIVER SLOT, FLUSH |
| Maximum AC Contact Voltage: | 125 V |
| Terminal Finish: | GOLD OVER NICKEL |
| Switch Action: | LATCHED |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Material (Actuator): | ZINC ALLOY |
| Contact Resistance: | 20 mohm |
| Insulation Resistance: | 10000000000 ohm |
| Maximum AC Contact Current: | .25 A |
| End Contact Material: | COPPER ALLOY |
| No. of Switch Sections: | 1 |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | .25A@28VDC |
| Dielectric Withstand Volts (V): | 600VRMS |
| PCB Hole Count: | 12 |
| Switch Type: | ROTARY SWITCH |
| AC Maximum Rating R Load (Contact): | .25A@125VAC |
| Indexing Angle: | 36 deg |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Switch Function: | DP5T |
| Contact Timing: | MAKE-BEFORE-BREAK |
| End Contact Plating: | SILVER |
| Insulator Material: | DIALLYL PHTHALATE |
| Body Height: | 9.4 mm |
| Additional Features: | PANEL MOUNTABLE |
| Body Length/Diameter: | 13.34 mm |
