EP12SD1ABE by C & K Components | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	C & K Components
Manufacturer's Part Number	EP12SD1ABE
Description	PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PLUNGER; Solderability: MIL-STD; Dielectric Withstand Volts (V): 1000VRMS;
Datasheet	EP12SD1ABE Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.02 A
Center Contact Plating:	GOLD OVER NICKEL
Center Contact Material:	COPPER ALLOY
Length (Bushing):	.177 inch
Housing Material:	GLASS FILLED NYLON
Type (Actuator):	PLUNGER
Maximum AC Contact Voltage:	20 V
Solderability:	MIL-STD
Terminal Finish:	Gold (Au)
Switch Action:	MOMENTARY
Terminal Material:	COPPER ALLOY
Termination Type:	SOLDER
Electrical Life:	30000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Contact Resistance:	20 mohm
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	.02 A
End Contact Material:	COPPER ALLOY
Maximum DC Contact Voltage:	20 V
DC Maximum Rating R Load (Contact):	.02A@20VDC
Dielectric Withstand Volts (V):	1000VRMS
Switch Type:	PUSHBUTTON SWITCH
AC Maximum Rating R Load (Contact):	.02A@20VAC
Sealing:	EPOXY TERMINAL SEALED; IP57
JESD-609 Code:	e4
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	THROUGH HOLE-RIGHT ANGLE
Body Width:	6.32 inch
Switch Function:	SPDT
Length (Actuator):	.215 inch
End Contact Plating:	GOLD OVER NICKEL
Insulator Material:	GLASS FILLED NYLON
Body Height:	9.27 mm
Body Length/Diameter:	8.13 mm
AC Maximum Power Rating R Load (Contact):	0.4VA@20VAC

Popular Products

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).

NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.