5GTH935+1SS09-15.0 by Apem Components | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Apem Components
Manufacturer's Part Number	5GTH935+1SS09-15.0
Description	KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Switch Action: MOMENTARY; Maximum DC Contact Voltage: 24 V; Maximum Contact Bounce Time: .5 ms;
Datasheet	5GTH935+1SS09-15.0 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.05 A
Maximum DC Contact Voltage:	24 V
Maximum Contact Bounce Time:	.5 ms
DC Maximum Rating R Load (Contact):	0.05A@24VDC
Housing Material:	PPS
Maximum Operating Force:	3.5 N
Switch Type:	KEYPAD SWITCH
Sealing:	IP67
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	10.1 inch
Switch Action:	MOMENTARY
Switch Function:	SPST
Termination Type:	SOLDER
Circuit Config:	1X1
Electrical Life:	10000000 Cycle(s)
Body Height:	6.4 mm
Body Length/Diameter:	10.1 mm
Maximum Operating Temperature:	160 Cel
Material (Actuator):	PPS
Contact Resistance:	30 mohm
No. of Switches:	1
Insulation Resistance:	10000000 ohm

Popular Products

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.