Silicone Diode For Alternating Current (SIDAC)
| Part | RoHS | Manufacturer | Trigger Device Type | Package Style (Meter) | Surface Mount | Terminal Position | Configuration | Case Connection | Package Body Material | Non Repetitive Peak On-state Current | Nominal Holding Current | Minimum Breakdown Voltage | Terminal Form | Package Shape | No. of Elements | Repetitive Peak Reverse Voltage | No. of Terminals | Sub-Category | Maximum Operating Temperature | Minimum Operating Temperature | Terminal Finish | Maximum RMS On-state Current | JESD-30 Code | Moisture Sensitivity Level (MSL) | Qualification | Maximum Holding Current | Additional Features | JEDEC-95 Code | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Maximum Breakdown Voltage | Peak Reflow Temperature (C) | Reference Standard |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Littelfuse |
SIDAC |
SMALL OUTLINE |
YES |
DUAL |
SINGLE |
PLASTIC/EPOXY |
20 A |
60 mA |
GULL WING |
RECTANGULAR |
1 |
3 |
110 Cel |
-40 Cel |
MATTE TIN |
R-PDSO-G3 |
2 |
Not Qualified |
e3 |
250 V |
||||||||||||
|
|
Littelfuse |
SIDAC |
FLANGE MOUNT |
NO |
SINGLE |
SINGLE |
PLASTIC/EPOXY |
20 A |
60 mA |
THROUGH-HOLE |
RECTANGULAR |
1 |
2 |
110 Cel |
-40 Cel |
MATTE TIN |
R-PSFM-T2 |
2 |
Not Qualified |
e3 |
250 V |
||||||||||||
|
|
Littelfuse |
SIDAC |
IN-LINE |
NO |
SINGLE |
SINGLE |
PLASTIC/EPOXY |
20 A |
60 mA |
THROUGH-HOLE |
RECTANGULAR |
1 |
3 |
110 Cel |
-40 Cel |
MATTE TIN |
R-PSIP-T3 |
2 |
Not Qualified |
e3 |
250 V |
||||||||||||
|
|
Littelfuse |
SIDAC |
|||||||||||||||||||||||||||||||
|
|
Littelfuse |
SIDAC |
CYLINDRICAL |
NO |
BOTTOM |
SINGLE |
ISOLATED |
PLASTIC/EPOXY |
150 mA |
220 V |
THROUGH-HOLE |
ROUND |
1 |
2 |
Silicon Surge Protectors |
125 Cel |
-40 Cel |
MATTE TIN |
O-PBCY-T2 |
Not Qualified |
150 mA |
TO-92 |
e3 |
40 |
250 V |
260 |
|||||||
|
|
Littelfuse |
SIDAC |
NOT SPECIFIED |
NOT SPECIFIED |
|||||||||||||||||||||||||||||
|
|
Littelfuse |
SIDAC |
LONG FORM |
NO |
AXIAL |
SINGLE |
ISOLATED |
PLASTIC/EPOXY |
20 A |
150 mA |
WIRE |
ROUND |
1 |
2 |
125 Cel |
-40 Cel |
MATTE TIN |
O-PALF-W2 |
Not Qualified |
DO-15 |
e3 |
UL RECOGNIZED |
|||||||||||
|
|
Littelfuse |
SIDAC |
CYLINDRICAL |
NO |
BOTTOM |
SINGLE |
ISOLATED |
PLASTIC/EPOXY |
20 A |
150 mA |
220 V |
WIRE |
ROUND |
1 |
2 |
Silicon Surge Protectors |
125 Cel |
-40 Cel |
MATTE TIN |
O-PBCY-W2 |
Not Qualified |
150 mA |
TO-92 |
e3 |
40 |
250 V |
260 |
||||||
|
|
Littelfuse |
SIDAC |
LONG FORM |
NO |
AXIAL |
SINGLE |
ISOLATED |
PLASTIC/EPOXY |
20 A |
120 mA |
220 V |
WIRE |
ROUND |
1 |
2 |
Silicon Surge Protectors |
125 Cel |
-40 Cel |
MATTE TIN |
O-PALF-W2 |
Not Qualified |
DO-15 |
e3 |
40 |
250 V |
260 |
|||||||
|
|
Littelfuse |
SIDAC |
LONG FORM |
NO |
AXIAL |
SINGLE |
ISOLATED |
PLASTIC/EPOXY |
20 A |
150 mA |
WIRE |
ROUND |
1 |
2 |
125 Cel |
-40 Cel |
MATTE TIN |
O-PALF-W2 |
Not Qualified |
DO-15 |
e3 |
UL RECOGNIZED |
A Silicone Diode For Alternating Current (SIDAC) is a type of semiconductor device that is used to control the flow of current in AC circuits. It is similar to a thyristor but operates at a lower voltage and current rating.
SIDACs consist of a bidirectional switching element that allows for the control of AC current in both directions. They are typically used in applications where a low-voltage, low-current trigger signal is required.
SIDACs work by applying a trigger voltage to the device, which causes it to turn on and conduct current in both directions. Once the voltage across the device drops below a certain level, the SIDAC turns off.
SIDACs are commonly used in AC power control applications such as lamp dimmers, motor control, and power supplies. They are often used in conjunction with other components such as capacitors, inductors, and diodes to form complete electronic circuits.
Proper selection and use of SIDACs are critical to ensure safe and reliable operation of power control circuits. Factors such as the maximum voltage rating, maximum current rating, and operating temperature range should be considered when selecting a SIDAC for a particular application.