Comparators | Vyrian

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LM339N/B+	Texas Instruments	COMPARATOR	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY		9000 uV		NO	4	BIPOLAR		2.5 mA			5	5	IN-LINE	DIP14,.3	Comparators		2.54 mm	70 Cel		1300 ns		0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14				Not Qualified	e0
5962-9452602VGA	Texas Instruments	COMPARATOR	MILITARY	WIRE	8		ROUND		METAL		4000 uV	-.001 uA	NO	2	BIPOLAR	MIL-PRF-38535 Class V				5		CYLINDRICAL		Comparator	36 V		125 Cel			OPEN-COLLECTOR	-55 Cel		BOTTOM	O-MBCY-W8				Not Qualified
LM111L	Texas Instruments	COMPARATOR	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED		4000 uV	.15 uA	YES	1			6 mA	-15 V		15		CHIP CARRIER					125 Cel		200 ns	OPEN-COLLECTOR/OPEN-EMITTER	-55 Cel		QUAD	S-CQCC-N20				Not Qualified
LM311P/P3	Texas Instruments	COMPARATOR	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY		10000 uV		NO		BIPOLAR			-15 V		15	+-15	IN-LINE	DIP8,.3	Comparator		2.54 mm	70 Cel				0 Cel		DUAL	R-PDIP-T8						NOT SPECIFIED	NOT SPECIFIED
5962-9673801VXA	Texas Instruments	COMPARATOR	MILITARY	GULL WING		SOP	RECTANGULAR	100k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	0 V	4000 uV	-.001 uA	YES	4	BIPOLAR	MIL-PRF-38535 Class V	2 mA	0 V		5		SMALL OUTLINE		Comparator	36 V	1.27 mm	125 Cel	.1 uA		OPEN-COLLECTOR; OPEN-DRAIN	-55 Cel	TIN LEAD	DUAL	R-CDSO-G14	1	2.33 mm	6.35 mm	Qualified	e0			9.91 mm
LM311N-N	Texas Instruments	COMPARATOR	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY		10000 uV		NO	1	BIPOLAR			-15 V		15	+-15	IN-LINE	DIP8,.3	Comparators		2.54 mm	70 Cel	.25 uA	200 ns		0 Cel		DUAL	R-PDIP-T8				Not Qualified
LM293AP	Texas Instruments	COMPARATOR	OTHER	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	0 V	4000 uV	-.4 uA	NO	2	BIPOLAR		2.5 mA	0 V		5	5/30	IN-LINE	DIP8,.3	Comparator	36 V	2.54 mm	85 Cel	.25 uA	1300 ns	OPEN-COLLECTOR	-25 Cel		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified				9.81 mm
5962-8687801CX	Texas Instruments	COMPARATOR																						Comparator														Not Qualified
5962-9679801VIX	Texas Instruments	COMPARATOR	MILITARY	WIRE	10	TO-5	ROUND		METAL	-18 V	4000 uV	.5 uA	NO	2	BIPOLAR	MIL-PRF-38535 Class V		-15 V		15		CYLINDRICAL		Comparator	18 V		125 Cel		80 ns	OPEN-COLLECTOR	-55 Cel		BOTTOM	O-MBCY-W10				Not Qualified
LMV761MAX/NOPB	Texas Instruments	COMPARATOR	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY		1000 uV	.00005 uA	YES	1		AEC-Q100	.7 mA		TR	2.7	2.7/5	SMALL OUTLINE	SOP8,.25	Comparator	5.5 V	1.27 mm	125 Cel	.000005 uA	120 ns	PUSH-PULL	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	e3	30	260	4.9 mm
TLV3404IDR	Texas Instruments	COMPARATOR	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	0 V	4400 uV	.0015 uA	YES	4			.00256 mA	0 V	TR	5	+-1.35/+-8/2.7/16	SMALL OUTLINE	SOP14,.25	Comparator	17 V	1.27 mm	125 Cel	.0001 uA	175000 ns	OPEN-DRAIN	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	e4	NOT SPECIFIED	260	8.65 mm
TLV2352IDRG4	Texas Instruments	COMPARATOR	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY		7000 uV	.002 uA	YES	2	CMOS		.4 mA			3	3/5	SMALL OUTLINE	SOP8,.25	Comparator	8 V	1.27 mm	85 Cel	.002 uA	640 ns	OPEN-DRAIN	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	e4	30	260	4.9 mm
TLV7211IDCKRG4	Texas Instruments	COMPARATOR	INDUSTRIAL	GULL WING	6	TSSOP	RECTANGULAR		PLASTIC/EPOXY	0 V	18000 uV		YES	1	CMOS		.014 mA	0 V		5	3/15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Comparator	16 V	.65 mm	85 Cel		10000 ns	PUSH-PULL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.1 mm	1.25 mm	Not Qualified	e4	30	260	2 mm
M38510/11201BDX	Texas Instruments	COMPARATOR	MILITARY	FLAT	14	DFP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED	-18 V	7000 uV	.001 uA	YES	4	BIPOLAR					15		FLATPACK		Comparator	18 V		125 Cel				-55 Cel		DUAL	R-CDFP-F14				Qualified
LM339PWLE	Texas Instruments	COMPARATOR	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR		PLASTIC/EPOXY		9000 uV	-.4 uA	YES	4	BIPOLAR		2 mA			5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Comparator	36 V	.65 mm	70 Cel	.25 uA	1300 ns	OPEN-COLLECTOR	0 Cel		DUAL	R-PDSO-G14		1.2 mm	4.4 mm	Not Qualified		NOT SPECIFIED	NOT SPECIFIED	5 mm
TLC393CPWLE	Texas Instruments	COMPARATOR	COMMERCIAL	GULL WING	8	TSSOP	RECTANGULAR		PLASTIC/EPOXY		6500 uV	.0006 uA	YES	2	CMOS		.05 mA			5	5/10	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Comparator	18 V	.65 mm	70 Cel		2500 ns	OPEN-DRAIN	0 Cel		DUAL	R-PDSO-G8		1.2 mm	3 mm	Not Qualified		NOT SPECIFIED	NOT SPECIFIED	4.4 mm
LM119J-MPR	Texas Instruments	COMPARATOR	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	-18 V	4000 uV	.5 uA	NO	2	BIPOLAR			-15 V		15		IN-LINE		Comparator	18 V	2.54 mm	125 Cel		80 ns	OPEN-COLLECTOR	-55 Cel		DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified				19.43 mm
LM311H/NOPB	Texas Instruments	COMPARATOR	COMMERCIAL	WIRE	8	TO-99	ROUND		METAL	-18 V	10000 uV	.3 uA	NO	1	BIPOLAR			-15 V		15	+-15	CYLINDRICAL	CAN8,.2	Comparator	18 V		70 Cel	.25 uA	200 ns	OPEN-COLLECTOR; OPEN-DRAIN	0 Cel		BOTTOM	O-MBCY-W8	1			Not Qualified
5962-8687701Q2A	Texas Instruments	COMPARATOR	MILITARY	NO LEAD	20	QCCN	SQUARE		UNSPECIFIED	-18 V	4000 uV	.0001 uA	YES	1	BIPOLAR	MIL-STD-883		-15 V		15		CHIP CARRIER		Comparator	18 V	1.27 mm	125 Cel			OPEN-COLLECTOR	-55 Cel		QUAD	S-XQCC-N20		1.91 mm	8.89 mm	Not Qualified				8.89 mm
5962-8765902CX	Texas Instruments	COMPARATOR	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED		10000 uV	.03 uA	NO	4	CMOS	MIL-STD-883	.175 mA			5		IN-LINE		Comparator	18 V	2.54 mm	125 Cel		2500 ns	OPEN-DRAIN	-55 Cel	TIN LEAD	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Qualified	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm
TLC374CD	Texas Instruments	COMPARATOR	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY		6500 uV	.0006 uA	YES	4	CMOS		.6 mA		TUBE	5	5	SMALL OUTLINE	SOP14,.25	Comparator	18 V	1.27 mm	70 Cel	.00003 uA	650 ns	OPEN-COLLECTOR	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	e4	NOT SPECIFIED	260	8.65 mm
LM211J	Texas Instruments	COMPARATOR	OTHER	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC		4000 uV		NO	1	BIPOLAR			-15 V		15	+-15	IN-LINE	DIP14,.3	Comparators		2.54 mm	85 Cel				-25 Cel		DUAL	R-XDIP-T14				Not Qualified
LM3302NE4	Texas Instruments	COMPARATOR	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY		40000 uV	-1 uA	NO	4	BIPOLAR					5	5	IN-LINE	DIP14,.3	Comparator	28 V	2.54 mm	85 Cel		1300 ns	OPEN-COLLECTOR	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	e4			19.305 mm
LM293MDREP	Texas Instruments	COMPARATOR	MILITARY	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY		5000 uV	-.4 uA	YES	2	BIPOLAR		1 mA		TR	5	5	SMALL OUTLINE	SOP8,.25	Comparator	36 V	1.27 mm	125 Cel	.05 uA	1300 ns	OPEN-COLLECTOR	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	e4	30	260	4.9 mm
LM339DBRG4	Texas Instruments	COMPARATOR	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR		PLASTIC/EPOXY		9000 uV	.4 uA	YES	4	BIPOLAR		2 mA			5	5	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	Comparator	36 V	.65 mm	70 Cel	.25 uA	1300 ns	OPEN-COLLECTOR	0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified	e4	30	260	6.2 mm
5962-8767401GA	Texas Instruments	COMPARATOR	MILITARY	WIRE	8		ROUND		METAL	-8 V	5000 uV	20 uA	NO	1	BIPOLAR	MIL-STD-883		-5 V		5		CYLINDRICAL		Comparator	8 V		125 Cel		14 ns	TOTEM POLE	-55 Cel		BOTTOM	O-MBCY-W8	1			Not Qualified
LM361N/NOPB	Texas Instruments	COMPARATOR	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	-16 V	5000 uV	30 uA	NO	1	BIPOLAR		20 mA	-10 V	TUBE	10	5,+-10	IN-LINE	DIP14,.3	Comparator	16 V	2.54 mm	70 Cel	30 uA	14 ns	TOTEM POLE	0 Cel	Matte Tin (Sn)	DUAL	R-PDIP-T14	1	5.08 mm	7.62 mm	Not Qualified	e3	NOT SPECIFIED	NOT APPLICABLE	19.18 mm
LMV7272TLX	Texas Instruments	COMPARATOR	INDUSTRIAL	BALL	8	VFBGA	SQUARE		PLASTIC/EPOXY	0 V	4000 uV		YES	1	BICMOS			0 V		1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH		Comparator	5.5 V	.5 mm	85 Cel				-40 Cel	TIN LEAD	BOTTOM	S-PBGA-B8	1	.6 mm	1.514 mm	Not Qualified	e0			1.514 mm
LM339J-N	Texas Instruments	COMPARATOR	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC		9000 uV		NO	4	BIPOLAR		2.5 mA			5	5	IN-LINE	DIP14,.3	Comparators		2.54 mm	70 Cel	.25 uA	1300 ns		0 Cel		DUAL	R-XDIP-T14				Not Qualified
JM38510/10304SHA	Texas Instruments	COMPARATOR	MILITARY	FLAT	10	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	-30 V	3000 uV	.0001 uA	YES	1	BIPOLAR	MIL-M-38510 Class S	7 mA	-15 V		15		FLATPACK		Comparator	30 V	1.27 mm	125 Cel		640 ns	OPEN-COLLECTOR	-55 Cel		DUAL	R-GDFP-F10		2.032 mm	6.12 mm	Not Qualified				6.858 mm
TL3016CDG4	Texas Instruments	COMPARATOR	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	-7 V	3000 uV	10 uA	YES	1	BIPOLAR		12.5 mA	-5 V	TUBE	5	5/+-5	SMALL OUTLINE	SOP8,.25	Comparator	7 V	1.27 mm	70 Cel	10 uA	7800 ns		0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	e4	30	260	4.9 mm
LM111WRLQMLV	Texas Instruments	COMPARATOR	MILITARY	FLAT	10	DFP	RECTANGULAR	50k Rad(Si)	CERAMIC, GLASS-SEALED	-18 V	4000 uV	.15 uA	YES	1	BIPOLAR	MIL-PRF-38535 Class V	6 mA	-15 V	TUBE	15	+-15	FLATPACK	SOP10,.4	Comparator	18 V	1.27 mm	125 Cel	.1 uA	200 ns	OPEN-COLLECTOR; OPEN-DRAIN	-55 Cel	TIN LEAD	DUAL	R-GDFP-F10	1	2.032 mm	6.3 mm	Not Qualified	e0			6.858 mm
TLV3701CDR	Texas Instruments	COMPARATOR	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	0 V	7000 uV	.0015 uA	YES	1	CMOS		.001 mA	0 V		2.7	+-1.25/+-8/2.5/16	SMALL OUTLINE	SOP8,.25	Comparator	17 V	1.27 mm	70 Cel	.00025 uA	240000 ns	PUSH-PULL	0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified	e4			4.9 mm
LM119WG-QMLV	Texas Instruments	COMPARATOR	MILITARY	GULL WING	10	SOP	RECTANGULAR		CERAMIC, GLASS-SEALED	-18 V	3800 uV	.475 uA	YES	2	BIPOLAR	MIL-PRF-38535 Class V		-15 V		15	+-15	SMALL OUTLINE	SOP10,.45	Comparators	18 V	1.27 mm	125 Cel	.475 uA	80 ns	OPEN-COLLECTOR	-55 Cel	Tin/Lead (Sn63Pb37)	DUAL	R-GDSO-G10	1	2.33 mm	6.12 mm	Not Qualified	e0	40	260
LMV393IDG4	Texas Instruments	COMPARATOR	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY		9000 uV	.4 uA	YES	2	BIPOLAR		.35 mA			5	3/5	SMALL OUTLINE	SOP8,.25	Comparator	5.5 V	1.27 mm	85 Cel	.25 uA	600 ns	OPEN-COLLECTOR	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	e4	30	260	4.9 mm
TL3116IPWLE	Texas Instruments	COMPARATOR	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR		PLASTIC/EPOXY	-7 V	3500 uV	1.5 uA	YES	1	BIPOLAR		15 mA	-5 V		5	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Comparator	7 V	.65 mm	85 Cel	1.1 uA	9.9 ns		-40 Cel		DUAL	R-PDSO-G8		1.2 mm	3 mm	Not Qualified		NOT SPECIFIED	NOT SPECIFIED	4.4 mm
5962-01-216-6070	Texas Instruments	COMPARATOR	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC		4000 uV		YES		BIPOLAR	MIL-STD-883 Class B (Modified)	2 mA			5	5	CHIP CARRIER	LCC20,.35SQ	Comparator		1.27 mm	125 Cel		1300 ns		-55 Cel		QUAD	S-XQCC-N20				Not Qualified		NOT SPECIFIED	NOT SPECIFIED
LM2901VQPWRG4	Texas Instruments	COMPARATOR	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR		PLASTIC/EPOXY		7000 uV	.5 uA	YES	4	BIPOLAR		2.5 mA		TR	5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Comparator	36 V	.65 mm	125 Cel	.25 uA	1300 ns	OPEN-COLLECTOR	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.2 mm	4.4 mm	Not Qualified	e4	30	260	5 mm
TLV3605RVKR	Texas Instruments	COMPARATOR	AUTOMOTIVE	NO LEAD	12		SQUARE		UNSPECIFIED		5000 uV	5 uA	YES	1			17.5 mA		TR	2.5		Chip carrier			6 V	.5 mm	125 Cel	5 uA	.8 ns		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N12	1	.8 mm	3 mm		e4	30	260	3 mm
LM2903DE4	Texas Instruments	COMPARATOR	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY		15000 uV	-.5 uA	YES	2	BIPOLAR		1 mA		TUBE	5	5/30	SMALL OUTLINE	SOP8,.25	Comparator	36 V	1.27 mm	125 Cel	.05 uA	1300 ns	OPEN-COLLECTOR	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	e4	NOT SPECIFIED	260	4.9 mm
LM319J4	Texas Instruments	COMPARATOR	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC		10000 uV		NO		BIPOLAR			-15 V		15	+-15	IN-LINE	DIP14,.3	Comparator		2.54 mm	70 Cel				0 Cel		DUAL	R-XDIP-T14						NOT SPECIFIED	NOT SPECIFIED
LMC6772BIMX	Texas Instruments	COMPARATOR	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	0 V	18000 uV	.0000004 uA	YES	2	CMOS		.02 mA	0 V	TR	5	2.7/15	SMALL OUTLINE	SOP8,.25	Comparator	16 V	1.27 mm	85 Cel	.0000004 uA	4000 ns	OPEN-COLLECTOR	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	e0	NOT SPECIFIED	235	4.9 mm
LM361M	Texas Instruments	COMPARATOR	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	-16 V	5000 uV	.00003 uA	YES	1	BIPOLAR		20 mA	-10 V	TUBE	10	5,+-10	SMALL OUTLINE	SOP14,.25	Comparator	16 V	1.27 mm	70 Cel	30 uA	14 ns	TOTEM POLE	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G14	1	1.753 mm	3.9 mm	Not Qualified	e0	30	235	8.6235 mm
TLV3404IN	Texas Instruments	COMPARATOR	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	0 V	4400 uV	.0015 uA	NO	4			.00256 mA	0 V	TUBE	5	+-1.35/+-8/2.7/16	IN-LINE	DIP14,.3	Comparator	17 V	2.54 mm	125 Cel	.0001 uA	175000 ns	OPEN-DRAIN	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14	1	5.08 mm	7.62 mm	Not Qualified	e4	NOT SPECIFIED	260	19.305 mm
JM38510/10304BHA	Texas Instruments	COMPARATOR	MILITARY	FLAT	10	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	-30 V	3000 uV	.0001 uA	YES	1	BIPOLAR	MIL-M-38510 Class B	7 mA	-15 V		15		FLATPACK		Comparator	30 V	1.27 mm	125 Cel		640 ns	OPEN-COLLECTOR	-55 Cel		DUAL	R-GDFP-F10		2.032 mm	6.12 mm	Not Qualified				6.858 mm
TLC339CPWLE	Texas Instruments	COMPARATOR	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR		PLASTIC/EPOXY		6500 uV	.0006 uA	YES	4	CMOS		.1 mA			5	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Comparator	18 V	.65 mm	70 Cel		2500 ns	OPEN-DRAIN	0 Cel		DUAL	R-PDSO-G14		1.2 mm	4.4 mm	Not Qualified		NOT SPECIFIED	NOT SPECIFIED	5 mm
LM2901MEP	Texas Instruments	COMPARATOR	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	0 V	7000 uV	.25 uA	YES	4						5		SMALL OUTLINE		Comparator	36 V	1.27 mm	85 Cel		1300 ns	OPEN-COLLECTOR	-40 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	e0			8.64 mm
TLC393CPE4	Texas Instruments	COMPARATOR	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY		6500 uV	.0006 uA	NO	2	CMOS		.05 mA			5	5	IN-LINE	DIP8,.3	Comparator	18 V	2.54 mm	70 Cel	.0006 uA	2500 ns	OPEN-DRAIN	0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	e4			9.81 mm

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.